Dual Camera Car Dvr Supplier
Full Hd Car Dvr 1080p User Manual
Full Hd Car Dvr 1080p Users Manual Download

| Home | User manual| GT300 DVR |

GT300 Car DVR Camera with 2.4 Inches 1080P

Main Features:

• GT300 1080P 2.4 inch 110 degree view car night vision CMOS DVR dashcam
• 1080P full HD resolution car dashcam recorder
• Adopting Generalplus 1248 chipset
• 1/2.7 inch CMOS image sensor
• 110 degree wide view angle
• 2.4 inch TFT display screen
• Support night vision, G-sensor, loop recording, anti-shake and motion detection
• Built-in microphone
• Video resolution: 1080P (1920 x 1080), 1080P (1440 x 1080), 720P (1280 x 720), WVGA (848 x 480), VGA (640 x 480)
• Support AV out and HDMI out
• Built-in 180mAh battery
• Support maximum 32G TF card (not included)
• Equipped with special car fixed suction cup mount, easy to fix and use

Besides the functions of common car data recorder, this device boasts four additional characteristics:
1. HD high resolution, HD night-vision, HDMI output
2. Quickly locking or unlocking video file
3. Parking monitoring function: after enabling parking mode function, the device can identify the surrounding environment and automatically turn on for recording and automatically saving the files even under the Off state.
4. Built-in G-Sensor, it can record the gravity sensing information and identify the up and down, left and right, front and rear displacement of the car, and will automatically lock the current video since it will identify the abnormality of driving.
In order to maximize the functions of car data recorder, please carefully read the User's Manual before using it (the design and specification of this device and accessories are subject to change without prior notice).

User's Manual GT300

«Power» button:

Function 1: Turn «On/Off» the deice
Under the Off state, press the «Power» button to boot the device and enter into the standby state.
Under the On state, hold down the «Power» button to automatically save the video file or turn off the device after parameters setting.

Function 2: Turn «On/Off» night viewer
Under the Standby, Video and Photo mode, press the «Power» button to turn «On/Off» night viewer

«Confirm» button:

Function 1: Turn «On/Off» video function.
Under the Standby mode, press the «OK» button to start video. During video recording, press the «OK» button to stop recording.

Function 2: Picture taking function
Under the Photo mode, press the «OK» button to take picture.

Function 3: File playing function
Under the Play Back mode press the «OK» button to «Play/Pause» video file.

Function 4: Confirm function
In the «Video menu», «Setting menu», «Photo menu» and «Play Back menu», confirm and save the setting option.

«Menu» button:

Function 1: Menu button
• Under the Standby mode, press the «Menu» button to enter into the «Video» menu, press it once to enter into the «Setting» menu, in the «Setting» menu mode, press the «Menu» button to automatically exit to Video mode.
• Under the Photo mode, press the «Menu» button to enter into the «Photo» menu, press it once to enter into the «Setting» menu, in the «Setting» menu mode, press the «Menu» button to automatically exit to Photo mode.

• Under the Play Back mode, press the «Menu» button to enter into the File Operation menu, press it once to enter into the Setting menu, in the Setting menu mode, press the «Menu» button to automatically exit to Play Back mode.

«Up» button:

Function 1: press the «Up» button in any menu to select the function upwards.
Function 2: when playing video, reduce the volume of the video file, hold down it to fast rewind.
Function 3: under the Video mode, press the «Up» button to turn On/Off microphone.

«Down» button:

Function 1: press the «Down button» in any menu to select the function downwards.
Function 2: when playing video, increase the volume of the video file, hold down it to fast rewind. Fast forward.
Function 3: Under the Video mode, press the «Down button» to enter into the screensaver function.

«Parking Monitoring» button:

Function 1: before turning off the device, press the «Parking Monitoring button» once, then letter «P» will appear on the right part of the screen, and the device will enter into the parking mode. Under parking mode, after turning off the device, if the device or car is shocked by foreign object, the device will automatically turn on to record video for about 20s, and then turn off.
After enabling the parking mode, to disable this function, press the «Parking Monitoring button», letter «P» on the left upper corner of the screen will disappear, which means that the device won't execute parking mode function.

«Mode button/Lock» button:

Function 1: mode switch
• Under the Video mode, press the «[Mode button/Lock button» once to enter into the Photo mode.
• Under the Photo mode, press the «Mode button/Lock button» once to enter into the Play Back mode.
• Under the Play Back mode, press the «Mode button/Lock button» once to enter into the Video mode.

Motion Detection:

If this function is enabled, when the device has detected picture change, it will automatically record video and save 10 seconds of video, and then stop recording.

Preparation on Memory Card (TF)

Requirements on TF card: the TF card for the device shall have adequate capacity with speed over CLASS6.

Install and Remove the TF Card

1. Insert the TF card into the TF card holder at correct direction till the TF card is fixed in the card holder.
2. When taking out the TF card, please lightly press the TF card, and then take it out after it has ejected out.

Cautions:

1. Caution: Please do not operate the TF card when the device is working to avoid damage.
2. Please pay attention to the direction of inserting TF card, if it is reversed, then it may possibly damage the device and TF card
3. After inserting the TF card into the device, the device will set the TF card as the default storage device, and it is possible that the files in the original TF card can't be read
4. If the TF card is not compatible with the device, please insert it again or try with another TF card.
5. It supports at most 32G.

Adjust the Position of Lens

The front lens of the device can rotate at 360° with the support so as to match the position of fixing the car data recorder and get better recording effect.

Turn On/Off the Device

1. Manually turn On/Off: press the «Power button» once, the screen lights on, then hold down the «Power button» to turn the device off.
2. Automatically turn On/Off during driving: connect it with 5V power supply of the car, when the car is starting, the device will automatically turn on and record video after time delay.

Basic Operation of Car Data Recorder

Switch the Working Mode

This device has three working modes: Video, Picture Taking and Play Back mode. Press the «Lock button» to switch the working mode.

Setting Menu and System Setting

Under the Video or Picture Taking mode, press the «Menu button». Press the «Up/Down button» to select the desired item; press the «OK button» to confirm the setting, and then press the «Lock button» to exit the menu.

System Setting Option

1. Parking Mode: Off 2G 4G 8G
2. Time/Date:
3. Automatic Off: Off/1/3 minutes
4. Screensaver: Off/3/5/10 minutes
5. Key Tone: On/Off
6. Language Setting: English/ Traditional Chinese/ Simplified Chinese/ Japanese/ French/Germany/ Korean/ Italian/ Portuguese/ Russian/ Spanish/ Polish
8. Light Frequency: 50/60
9. Supplement Lamp: Off/On/Automatic
10. Format: Cancel/Confirm
11. Default Setting: Cancel/Confirm
12. Version: Version Number

Video

Enter into the Video mode, the video mark will appear at the left upper corner of the screen, press the «Confirm button» to record video, during recording, the ● mark at the left upper corner of the

Full Hd Car Dvr 1080p Users Manual